Frequently Asked Questions About Air Compressors

Frequently Asked Questions About Air Compressors!

When selecting the best compressor for industrial applications, many questions cross our mind. And, when this happens, it is super-important that you must know all the answers. 

Jyoti Engineering Combine gets a lot of such questions for air compressors or marine compressors, let’s look into them –

FAQ 1 – How Does an air compressor work?

The air compressor, no matter with whatever brand compressor parts – Mycom compressor parts, Carrier reconditioned compressor, Sabroe reconditioned compressor; works in the same way as a regular compressor will. It works by forcing air into a container and pressurizing it. Then, when the pressure builds up, the air is forced through an opening in the tank. 

To be precise – 

An air compressor works by using electric power to create pressurized air. This pressurized air is released and converted to usable power, which further has multiple applications. 

All of this is obtained when the air is compressed within each chamber with the marine air compressor parts like piston, rotary vane, screw, or scroll element. The pressurized air is released in the industrial system’s downstream receivers and piping system. 

FAQ 2 – What is the air compressor used for?

Air compressors are used for applications such as –

  • Filling gas cylinders with high-pressure clean air
  • The pressurized clean air is used for operating pneumatic HVAC systems or tools. 
  • It is used for applications like – filling tires. 

Not only this, the air compressor is used for a wide variety of other applications across different industries like automotive, medical, food, beverage, petroleum, pharmaceutical, and others.

FAQ 3 – What should be the frequency of changing the oil in the air compressor?

The recommended frequency for changing the oil in the lubricated reciprocating, rotary screw, and rotary vane air compressor is 3 months. You can change it with expert help from Jyoti Engineering Combine. We also provide services for reconditioning a compressor if it has worn out. 

FAQ 4 – When should I replace the air intake filter?

The maximum of compressors has an air intake filter to filter out the built-up debris. This needs to be cleaned for smooth functioning as the debris may be hardened up, and then it becomes difficult to clean. So, if you see the debris hardened, or notice any tears or holes in the filter, it is the right time to change it or get it replaced with us. 

Make sure you clean the air intake filter every week!

FAQ 5 – Do I Need a Reciprocating Compressor or a Rotary Screw Compressor?

For most industrial applications, a reciprocating compressor is adequate. If the application includes an operation that runs day and night, you must go for a rotary screw compressor. 

FAQ 6 – What is the correct voltage for the air compressor?

The correct voltage for the air compressor is usually 110 volts for a small compressor, and for a colossal one, an air compressor with 460 volts is advised.

These were some of the most frequently asked questions, and if you have one in your mind, you can contact us for expert advice about the compressors. 

We promise – low cost, premium quality, and easy installation! If you come up with an old compressor, we make sure the parts that are destroyed are removed, and the entire compressor is equipped with new compressor parts. Jyoti Engineering Combine deals with significant plant compressor parts, which are Ammonia and Freon based. We trade for all of the significant industries that require high power and perfect compressors for smooth working. 

We are a global leader in providing energy-efficient, customer-centric solutions that meet every unique compressor requirements.

Leave a Comment

Your email address will not be published. Required fields are marked *